Godiag – SK310 – Test Platform – BMW CAS4 / CAS4+ Programming Support Off Site Key Programming

Please Note: This item is a pre-order and will be available soonThis Godiag test platform can program the BMW CAS4 CAS4+ key on the workbench by OBD without opening the machine cover, thus avoiding car power loss and data loss caused by long time unlocking of the CAS4 / CAS4+ on the car. It can program and add  new keys when all keys lost and replace CAS4 / CAS4+ ECU module by working together with Xhorse VVDI2, BMW VVDI BIM Tool, Lonsdor K518, and Autel IM608 etc. Features:Godiag GT100 is for OBDII protocol communication detection and ECU maintenance, diagnosis, programming, and coding. Convert the car OBD2 interface into 6 pin for signal detectionAble to connect the single modules or multiple modules of the vehicle. Connect with any diagnostic tool to detect the car communicationSupply power to the car when changing the battery to avoid the vehicle control module being lost, automatically locked, key remote control fails or the fault light turns on. Works together with Godiag GT100, CDGI, XHorse VVDI 2, BMW VVDI BIM Tool, Autel IM608, Yanhua ACDP, Tango etcFor BMW Cas car model from 2000-2014 yearsOne Year WarrantyGodiag CAS4 CAS4+ test Platform Supported Car List:Supported ModelsCAS4 CAS4+9S12XD512(1L15Y)9S12XEF100(5M48H)For BMW 5 Series2010 – 2014F07/F110/F11/F18For BMW 6 Series2011 – 2013(F12 F13)For BMW 7 Series2009-2013(F01 F02)  Godiag for BMW CAS4 & CAS4+ Programming Test PlatformBefore installing back the CAS4 CAS4+ module t the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate or there is any malfunctionUsed to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access.)Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with CAS4 CAS4+.Troubleshooting – when the key can’t start the car, this test platform can be used to pinpoint whether it is caused by the mismatch between CAS4 CAS4+ and the key. This test platform adopts the dedicated OEM CAS4 CAS4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module. Package Includes:1pc x GODIAG Test Platform For BMW CAS4 / CAS4+ Programming1pc x GODIAG OBD2 to OBD25 Cable